Website builder for metal roofing contractors

Metal Roofing website design, real as your roof.

Up on a ridge today; a booked roof tomorrow.

$199/month, all-in — we build it first, you pay once you’ve seen it.

What a metal roofing site is built from

Grounded in your roof work.

Roof leaking around screws / failed washers (backed-out fasteners), oil canning complaints on a new panel job, want metal over an old shingle roof / reroof quote — the calls that pay. mcelroy metal, englert, abc (american buildings) / abc supply — the brands you run. standing seam vs. screw-down, snap-lock vs. mechanical seam (1" vs 1.5"), oil canning — the words you use. Maria reads your real metal roofing work and builds every bit of it in.

Jobs it books

Starting with roof leaking around screws / failed washers (backed-out fasteners):

  • Roof leaking around screws / failed washers (backed-out fasteners)
  • Oil canning complaints on a new panel job
  • Want metal over an old shingle roof / reroof quote
  • Exposed-fastener roof at end of life needs re-screw or replace
  • Hail or storm damage / insurance estimate
  • Want standing seam for resale value
  • Leaks at valleys, pipe boots, or skylight flashing
  • Condensation/sweating under metal in a barn or pole barn
  • Color fade / chalking on old panels
  • Loose or noisy panels in high wind
Speaks your trade

Real metal roofing terms, not filler:

standing seam vs. screw-downsnap-lock vs. mechanical seam (1" vs 1.5")oil canningstriations / minor ribkynar / SMP / PVDF finishkicker / hemZ-barpancake head vs. hex headtek screwgauge (24ga / 26ga / 29ga)5V-crimpPBR / R-panelbutterfly / pan widthclip relief / thermal movementback-pan / cleattwo-piece counterflashingtelegraphing
Names buyers know

Carried on your roof work:

McElroy MetalEnglertABC (American Buildings) / ABC SupplyFabralMBCIDrexel MetalsUnion CorrugatingMetal Sales ManufacturingATAS InternationalPetersen (PAC-CLAD)BerridgeCentral StatesMule-HideSherwin-Williams (Kynar 500/PVDF)S-5! (clamps)SnoBlox / SnojaxOMG / RoofGrip fastenersTriangle Fastener (TFC)DripStopOwens Corning (underlayment/ProArmor)

Examples of what metal roofing pros use — Maria shows only what you carry, not an affiliation.

What you work with

What your roofs run on:

butyl sealant tape (5/16 & 3/8)color-matched touch-up paint pens (Kynar)tube sealant / Geocel & NovaFlex polyurethaneclosed-cell foam closuressynthetic underlaymenthigh-temp ice & water membraneself-tapping & wood-grip screws (ZAC/Atlas-Galva coated)pop rivets (color-matched)DripStop anti-condensation membranelap & stitch screwsspray foam / vent foam closurestek screwsstanding seam panels (snap-lock & mechanical-lock)exposed-fastener panels (R-panel / PBR / 5V-crimp / corrugated)ridge cap & vented ridgeZ-closures & foam closure stripseave/drip edge & gutter apronrake/gable trimendwall & sidewall flashingvalley metal & W-valleypipe boots / Dektite collarssnow guards (S-5! ColorGard, pad-style)butyl tape sealantclips (floating/fixed) & panel fasteners with EPDM washershigh-temp ice & water shieldtransition/pitch-break flashing
Gear you run

On the truck for a roof:

roll former / portable roll-forming machinemechanical seamer (SSQ II / RollSeam)hand seamers & tongsMalco aviation snipsTapco / Swenson portable brakeKett & PacTool double-cut shearsnibblerPittsburgh lock formerimpact drivers with magnetic nut settersmetal-cutting circular saw

Ingest · Analyze · Build

Built from your work, not a template.

Read from your real metal roofing jobs, not a template — the first draft is designed to be the one you keep.

  • Copy in metal roofing language: standing seam vs. screw-down, snap-lock vs. mechanical seam (1" vs 1.5"), oil canning, striations / minor rib, kynar / smp / pvdf finish.

  • A photoreal hero set up on a ridge, so the page looks made for a roofer.

  • Your real roof photos — a standing-seam metal roof — harvested and placed, never stock.

  • Book button wired to your scheduler, domain registered, full SEO baseline on every page.

  • A voice receptionist on the site that answers when someone with roof leaking around screws / failed washers (backed-out fasteners) gets in touch, and books the roof.

On-site FAQ

The FAQ Maria writes for a metal roofing site.

A sample, localized to your city and services on the real build.

How much does a new roof cost in your area?

Most your area homes run $8,000–$18,000 for a full asphalt-shingle replacement, with repairs typically $400–$2,000. Metal roofs run higher (~$14,000–$30,000) but last far longer in the Florida sun, and tile is higher still. Size, pitch, tear-off layers, and whether new decking or wind-mitigation upgrades are needed all move the number. Use the quote tool above for a range on your roof.

Will my homeowner's insurance cover a roof replacement?

It depends on the cause and your roof's age. Storm or hurricane damage is usually covered (minus your wind/hurricane deductible), while normal wear is not. Florida's insurance market is strict right now — many carriers won't renew a roof over ~15–20 years old, so a documented inspection and photos matter. A local pro can assess the damage and help you understand whether a claim makes sense before you file.

Shingle, metal, or tile — what's best for a Florida roof?

Architectural asphalt shingles are the affordable standard (20–30 yr). Standing-seam metal costs more up front but handles hurricanes and heat best and can lower insurance premiums. Concrete/clay tile lasts longest and suits Mediterranean-style homes but is heaviest and priciest. For most your area homes, upgraded shingles or metal are the sweet spot.

How long does a roof last in your area's climate?

Florida's UV, heat, humidity, and storms age roofs faster than up north — expect 15–20 years from asphalt shingles, 30–50 from metal, and 50+ from tile. Regular inspections after major storms and keeping the roof clean of algae streaks (common in humid FL) meaningfully extend that life.

Do I need a permit and a wind-mitigation inspection?

Yes — a roof replacement in Florida requires a permit, and your contractor pulls it. It's also worth getting a wind-mitigation inspection afterward: features like hurricane straps, a sealed roof deck, and proper nailing can earn sizable insurance discounts. Reputable your area roofers handle both as part of the job.

My roof is leaking — can someone come out fast?

Yes. An active leak is treated as urgent, especially during storm season — local your area pros offer emergency tarping and same-day assessments to stop water damage before it spreads. Flag it as urgent in the quote tool or call the number above.

Do you serve my area?

Yes — we cover your area and the surrounding area. Enter your details in the quote tool and a local roofing pro will confirm your spot and reach out.

Get started

See your own metal roofing site.

Tell us your metal roofing business. $199/month, all-in, and you see your build before you pay.

Where can people find you right now?

We build from whatever is already true about you. If that is nothing yet, say so — we would far rather ask you than guess.

See every trade Maria builds for →